Frizzell Ltd

Specifications.

General Construction: The bridge is built from two 2.45 metre long by 2.9 metre wide sections. Each section has its own ramps attached and hinged for easy packing. One weigh platform is permanently attached to a hinged wheel set and frame.

The easiest portable bridge to packup, layout and transport.

Laying out the bridge is simple. The rear section is lowered off the transport bogy and unclipped. The front section is pulled beside the back section, disconnected from the towing vehicle and lowered to the ground. Ramps are folded down and the two units connected.

To pack up the drawbar is raised with the attached jack. The bogy wheels are folded down and locked and the ramps folded up. The front unit is backed over the back unit, which is winched up and attached to the bogy frame.

The unit is less than two tonnes and 2.5 meters wide and can be towed with a 4 wheel drive light vehicle. Both layout and packup can be achieved by one person in less than 15 minutes.

Because of its construction the bridge has a very low profile of only 150mm from ground to deck height. The distance between the two platforms can be adjusted for varying truck wheelbases.

Weighbridge General Specification:

Length: Two platforms 2.45 metres X 2.9 metres. Deck Height Above ground: 150mm

Gross vehicle Weight: 30 tonnes maximum.

Certification: Class IV, 100 kg resolution. Load Cells; 8 X 10 tonne.

Indicator: Rinstrum 5230 Truck indicator or equivalent..

General: The output from the indicator can be attached to a weight docket printer or to a computer and supplied software. A large display can also be added.

If you have specific questions about equipment please contact us